Clear answers for confident project decisions.

EXW, FOB, CIF and DDP are candidate terms, not universal defaults. We organize the comparison; the order parties and relevant specialists confirm the final term.

Yes, the service can organize application conditions, configuration questions, coordination interfaces and missing documents for discussion. It does not replace engineering, site work, tender responsibility or contractual delivery responsibility.

A30 is described as a configurable product line. Capacity, accessories, electrical needs, and market requirements remain order-specific.

Yes. The configuration path is intended to make the existing options and the information needed to review them clearer before a broader route is considered.

Yes. The P40 combines RO filtration with kettle-based true-boiling heating and supports temperature and water-volume control for tea, coffee and daily hot water.

The catalogue lists product configuration, packaging and branding, and OEM / ODM coordination as available support. Exact requirements are reviewed according to the project and final order.

The P60 page lists hot, ambient and chilled water modes for different daily drinking occasions.

The catalogue lists product configuration, packaging and branding, and OEM / ODM coordination as available support. Exact requirements are reviewed according to the project and final order.

The P60 page lists tank mode and direct-pipe mode to support different installation conditions. Exact installation requirements should be confirmed for the project.

No. The consultation can organize the market, channel, product and information questions that precede a commercial discussion. Regional rights, qualification, exclusivity, pricing and cooperation terms require separate confirmation.

Yes. Share the information your team has and identify the open items. The first review can help determine which question, site detail or responsibility needs attention next.

Yes. Describe the public or staff area, its use, placement space and operating responsibility for the separate general indoor-air environment task.

We organize origin, destination, timing, volume, term and forwarder inputs. The responsible forwarder or carrier confirms the specific transport path, booking and execution details.

A30 lists dual outlets and a 1:1 water-ratio label. Confirm how each outlet is to be used in the project.

A40 shows a 1:1 water-ratio label. The operating conditions and test method behind that label are not provided.

The page shows water utilization of at least 60%. Do not convert that label into a performance or compliance conclusion.

The page lists water utilization of at least 60%. The number should not be expanded into an efficiency certification.

The catalog lists 2200 W rated power. Confirm voltage, outlet suitability, and project electrical requirements before use.

R30 lists a 3.2 gallon pressure tank. Confirm tank compatibility, placement, and connection requirements for the project.

No. The P40 does not use a built-in purified-water storage tank. Its RO system produces fresh drinking water on demand from the 2 L raw-water tank.

Each inspection point can be paired with its relevant scope and record format so the review has a clear reference.

Provide the model context, the relevant component details and available visual evidence so the next identification question is clear.

U20 lists a 115 mm product width and dimensions of 115 × 347 × 349 mm. Confirm the available mounting and connection space.

The Service path connects the early brief to quantity, destination, handover and later coordination questions. Your team can keep the project context visible as more details become available.

They give the team category roles to compare against the workplace inputs already mapped. Their place in the brief connects point-level questions with the wider office operating context.

Each category has a role in the café solution path: defined points, water information, operating pattern and beverage-service questions. Your team can compare those roles against the setting you have mapped.

Start from the conditions, intended use and decision that need attention. The review can then distinguish a configuration task from a new development or packaging task.

List them separately in the inquiry and identify the locations, source information, quantity, space and responsible teams for each layer.

Keep the differing use patterns, operating owners and delivery requirements visible within the same request instead of combining them into one general note.

We separate document gaps from an itemized cost breakdown and reconciliation. A landed-cost reference depends on destination, product, origin, declared value, term, transport input and local rules; the importer, broker and local authorities confirm final treatment.

Bring the affected scope and the available evidence record into the next review so the responsible owner has context.

It is used for a defined counter-based drinking point. Share the counter space, power information, expected use and maintenance responsibility.

The Air Purifiers category supports a general indoor-air environment discussion within the wider workplace setting. Relevant space and project questions can remain in the same structured brief.

The P50 lists thick-film, rapid heating and describes hot water in seconds without repeated boiling.

The page lists a three-second cartridge-change feature and leakage protection. No replacement interval or leak-free guarantee is supplied.

The P40 is designed for three-second cartridge replacement and includes an anti-drip outlet and filter reminder for easier routine maintenance.

Packaging and artwork work follows its own review path so that relevant inputs and ownership can be made visible without treating it as a generic product change.

R70 has horizontal quick-change wording and a filter-life reminder. Neither statement provides a guaranteed replacement interval.

Quick-connect cartridges, a filter-life reminder, and one-touch cleaning are listed. The page does not state a replacement interval.

Warranty review coordination uses the available order and case information; coverage is reviewed through the appropriate process rather than approved automatically.

P70 is shown at 429 × 217 × 328 mm. Check transport, countertop clearance, and local connection needs before ordering.

D40 lists three water outputs. Define the required outlet uses and plumbing arrangement before the project is finalized.

The listed size is 467.5 × 142 × 362 mm. Allow for the unit, connections, and cartridge service space.

D50 is shown at 385 × 162 × 420 mm. Confirm distribution pressure, cabinet access, and market compliance before ordering.

P70 has a 3 L raw-water tank and a 1.5 L purified-water tank. The page lists a removable purified-water tank.

C10 lists a rated flow of 2 L/min. The catalog does not provide a test condition, battery endurance, or continuous-operation claim.

Long-life cartridge is catalog text only. A numerical cartridge lifetime and replacement schedule need separate confirmation.

Quick-change and no-leakage are catalog descriptions. They are not a promise of a fixed maintenance time or leak-free result.

The page shows water utilization of at least 60%. Test conditions and site results are not supplied.

List guest, dining, back-of-house and beverage-service areas separately, then add the point locations, expected use and operating owner for each zone.

Include the area type, number of points, use pattern, available space, project quantity and timing. This helps distinguish one location from another.

WiFi and TDS monitoring are catalog features. Connectivity, accuracy, and app behavior are not specified.

R40 lists a 139 mm slim depth and overall dimensions of 392 × 139 × 350 mm. Confirm cabinet and tubing clearance on site.

The page names a front solenoid valve and an integrated waterway. It does not document internal engineering details or operating pressure.

No. The consultation can clarify the target product, brand, use case and technical questions and identify whether the S2 development path is relevant. Development scope, responsibilities and later project decisions are not confirmed here.

No. This service organises remote coordination and review questions; on-site service is not included.

P70 is listed for travel and temporary sites as a portable outdoor heated RO purifier. Its final power source, feedwater condition, and heat setting must be confirmed for the project.

The page shows no more than 50 dB. Confirm the project environment rather than treating it as a guaranteed site value.

The catalog shows no more than 55 dB. Treat that as a page value, not as a site-specific noise commitment.

The catalog lists 3.5 L/min clean-water flow and 1.58 L/min purified-water flow. Use those figures only with their catalog limits.

The listed specifications are 1900 W power, 0.18 L/min purified flow and a product size of 244 × 382 × 425 mm. The listed filtration configuration is PP/carbon composite + RO + PP/carbon composite.

P80 lists a 5.5 L raw-water tank and a 1.8 L purified-water tank. Its RO capacity is stated as 150G.

U10 is shown at 300 × 226 × 407 mm. Check each installation format for service access and connections.

R70 lists a 123 mm slim depth and dimensions of 352 × 123 × 310 mm. Check the available space for fittings and service.

D10 is described as allowing adjustable pure and clean water blending. The actual blend ratio is not stated and must not be assumed.

You can describe the shared space, its use and the placement information available for a general indoor-air environment question.

R70 is listed as a 75G slim RO purifier. The page does not give feedwater pressure or final flow conditions.

D40 is identified as an 800G RO product with ECF, RO, and carbon components. Final configuration needs order confirmation.

R30 is listed as a 75G dual-water small-flow RO system. It is not presented as a high-flow or tankless product.

The catalog lists clean-water flow of at least 5 L/min. It does not provide the test conditions for that value.

D10 lists PP/C1, UF, RO, and T33. The route does not establish a certification, health result, or unlisted internal design.

The confirmed details include TDS display, filter-life display, cup sensing, volume presets and child lock; no unlisted performance or efficacy claim is confirmed.

The confirmed details include the catalogue lists product configuration, packaging, branding and OEM/ODM support; no unlisted commercial term is confirmed.

They help your team recognize a café planning setting and support the page’s visual rhythm. The page-level visual note explains their role while product and project information remains in the content and category discussion.

They are listed as operating and monitoring functions on the P60 page. The website should describe them only as a TDS display, UV circulation and filter reminders, without claiming test accuracy, sterilization, bacteria removal, certification or filter life.

D30 shows a 1:1 water-ratio label. It does not provide test conditions or a universal water-saving result.

A20 lists TDS and filter-life display functions. The catalog does not give display accuracy or a filter replacement duration.

A smart faucet with TDS is listed, together with an integrated waterway and timeout alarm. Accuracy and alarm behavior are not quantified.

It provides a concise handover point: what was reviewed, what needs to happen next, and which inputs remain open.

R40 shows a recovery ratio greater than 1:1. The test method and operating conditions are not stated.

The catalog shows water saving of at least 60%. It does not provide the conditions or calculation method behind that label.

Zero-stale-water system is a catalog feature label. It must not be read as a quantified water-quality or efficiency guarantee.

The A50 page names PCS, RO, and GIT, alongside a 0.0001 μm catalog label. It does not supply a laboratory result or certification.

The P40 uses a carbon block, a 150G RO membrane and an antibacterial carbon stage, with a filtration precision of 0.0001 μm.

The catalogue lists PP/carbon composite + RO + PP/carbon composite filtration, with 0.0001 μm RO filtration.

The catalogue lists PP + RO + GAC filtration and a 100G RO capacity.

The catalog shows 0.01 μm. No independent test result, contaminant claim, or certification is provided.

U20 carries a 0.01 μm catalog label. The page does not quantify retention, flow, or independent filtration results.

The P70 page lists PP, RO, and GAC. It does not provide an internal waterway drawing or a certification claim.

A50 lists pure-water flow of at least 3 L/min with a 1200G RO configuration. Site pressure and the test conditions behind that figure are not stated.

The catalog gives 3.5 L/min clean-water flow and 2.1 L/min purified-water flow. It does not state test conditions or a site guarantee.

The listed purified-water flow is 1.1 L/min. No broader flow guarantee or test condition is supplied.

The catalog gives pure-water flow of at least 1.6 L/min. No pressure range or performance test condition is included.

The catalog lists pure-water flow of at least 2.5 L/min. It does not state feedwater conditions or a project flow guarantee.

P80 is presented as a countertop RO ice and hot-water dispenser with purification, mineralization, cooling, heating, and ice-making wording. Those labels are not certification or performance claims.

We assess the information supplied and identify the practical details needed to progress the Hospital project request. We typically respond within 24 hours.

We assess the site information provided and identify the practical details needed to progress the School request. We typically respond within 24 hours.

We review the information shared, identify the next questions and prepare the category and Service conversation. We typically respond within 24 hours.

We assess the project information provided and identify the practical details needed to progress the Apartment request. We typically respond within 24 hours.

We review the zones and project information provided, then identify the practical details needed for the next conversation. We typically respond within 24 hours.

Include the sink location, cabinet space, point layout, source information when available and maintenance access.

Share the point location, cabinet space, expected use, source information when available and the maintenance contact.

The catalog refers to multiple installation modes. Determine the required tubing, fittings, and site arrangement before ordering.

C10 is listed as a cordless multi-stage pet water purifier with dual water modes. It is not presented as a medical or animal-health device.

The page refers to horizontal three-second cartridge service. It does not define a guaranteed service time or cartridge lifespan.

A30 is shown at 430 × 132 × 322 mm. Verify cabinet dimensions and horizontal service access before installation.

A folding UV faucet is listed as a product feature. The catalog does not establish UV efficacy, sterilization performance, or a health outcome.

The current minimum order quantity for P40 is 50 pcs. Final configuration, packaging and commercial terms are confirmed for each order.

The P50 is a countertop tea and coffee RO dispenser for purified hot-water routines around tea and coffee.

The P60 is a countertop hot and cold RO dispenser for hot, ambient and chilled purified water routines.

The P70 is a portable outdoor heated RO purifier for travel and temporary-site use.

The P80 is a countertop system that combines purification, mineralization, heating, ambient dispensing, chilling and ice functions.

R30 is shown at 400 × 230 × 455 mm. Account for the separate tank and installation tubing as well.

The page lists PP/C, RO, and CTO across three cartridges and four stages. It does not provide a certification or internal water-path drawing.

The useful result is a clearer requirement summary, a list of open items, candidate directions and a record of the information needed for the next responsible review.

The confirmed specification set includes RO 100G, a 3 L raw-water tank, a 1.5 L pure-water tank and a 1.1 L/min pure-water flow.

The confirmed specification set includes RO 150G, 2200 W rated power, a 5.5 L raw-water tank and a 1.8 L pure-water tank.

A20 is listed at 230 × 152 × 460 mm, with a 230 mm product width. Confirm the cabinet clearance needed for plumbing and service.

D50 is listed as a 1000G whole-kitchen RO with dual outlets. Confirm the intended outlet routing and household plumbing plan.

D20 is described with pure-water and strontium-rich-water modes. The label does not establish mineral content or a health benefit.

Confirm intended mounting, water conditions, cartridge servicing, and local compliance. Do not infer RO performance from this UF product.

Product configuration, OEM / ODM project coordination, packaging coordination, branding coordination and supply coordination can be reviewed for each project. Final scope and availability are confirmed before quotation and order scheduling.

Variable-frequency flushing, leakage protection, and timeout protection are named. Their settings and site behavior require project confirmation.

Leakage protection and no more than 55 dB appear as catalog wording. They are not safety, noise, or performance guarantees.

Clarify inlet pressure, tubing route, faucet choice, certification needs, and cartridge replacement requirements. Those details are not locked by the catalog page.

D50 shows RO-water flow of at least 2.5 L/min. The actual project result depends on conditions not stated on the page.

Confirm the required power arrangement, water source, final configuration, and any local compliance requirement. The catalog supports product, packaging, branding, and OEM/ODM discussion only.

Prepare the target market or channel, intended users, application or project conditions, product direction and any known packaging, regulatory or delivery questions. Existing documents and clear gaps are both useful inputs.

Available specifications, agreed conditions, reference samples or materials, and the question that needs attention help establish the review context.

Choose the required capacity option, outlet arrangement, and installation conditions. Certification, input pressure, and final configuration are not locked by the page.

Start with the applicable requirement, the specification version, the agreed conditions and the scope that needs review.

Confirm final blending needs, capacity, plumbing, and any market requirement. Food-grade water-contact-parts is catalog wording, not a regulatory determination.

Confirm the feedwater condition, cabinet fit, intended display use, and final service arrangement. Certification and installation requirements are not listed.

Confirm the final configuration, local installation conditions, power and water requirements, certifications, commercial terms and any project-specific acceptance criteria before order. Facts not listed in this FAQ are not represented as confirmed.

Confirm the final configuration, local installation conditions, power and water requirements, certifications, commercial terms and any project-specific acceptance criteria before order. Facts not listed in this FAQ are not represented as confirmed.

Available application details, requirements, reference materials and open questions are useful inputs. The exact brief can be refined as the route becomes clearer.

Bring the confirmed order scope, destination, receiving arrangement, importer responsibility, preferred risk boundary, packaging needs and known document or cost questions. If a cost reference is relevant, include product, origin and declared-value inputs.

Start with the order or model reference, the observed issue, available photos or video, the use environment and actions already tried.

Do not infer a maintenance schedule, certification, pressure rating, or performance guarantee beyond the listed catalog features.

Start with office areas, expected use, points, available space, project size, expected quantity, timing, maintenance ownership and handover questions. These details give the next reviewer a common workplace picture.

Project stage, apartment or shared locations, quantity, timing, destination and the parties coordinating maintenance or installation details are useful.

Start with public areas, drinking-point locations, expected use, available space, maintenance windows and the person responsible for each site detail.

Share the point location, cabinet or nearby space, source information when available, expected use and the maintenance contact.

Include the point location, expected use, available counter or cabinet space, known power or drainage details, quantity and timing.

C10 is shown at 224 × 162 × 188 mm. Confirm the intended placement, charging arrangement, and cleaning routine before use.

The page names PP, UF, and C2 in a three-stage filtration route. It does not provide a certification or direct-drinking guarantee.

The page lists PP, UDF, UF, RO, and T33. That sequence does not establish an unlisted internal routing diagram.

The confirmed treatment set is PP, RO and GAC. This wording describes the locked product facts only and does not imply an unlisted internal routing diagram.

The confirmed treatment set is a carbon block, RO and a composite antibacterial carbon stage. This wording describes the locked product facts only and does not imply an unlisted internal routing diagram.

U10 names folded PP/carbon composite, UF, ATME, and GAC across four cartridges and five stages. It does not make a direct-drinking safety claim.

The catalog names home pet care, retail portfolios, and private-label programs. Final packaging, commercial terms, and market requirements need confirmation.

The allowed use boundary is travel and temporary sites, supported by multi-power operation, dual water sources and a movable pure-water tank. Final plumbing, power, pressure, clearance and other site conditions must be confirmed for the actual project when they are not stated in the locked facts.

The allowed use boundary is premium home, office and hospitality settings with hot, ambient and chilled water functions. Final plumbing, power, pressure, clearance and other site conditions must be confirmed for the actual project when they are not stated in the locked facts.

The page lists countertop, wall, and undersink installation options. Verify mounting, plumbing, and available space for the selected location.

The capability context can be reviewed alongside the relevant inspection points when a project needs that additional background.

The catalog names premium homes, offices, and hospitality. Final installation, ice output, temperature settings, and service terms require project confirmation.

The catalogue lists Home, Office and Hospitality as suitable applications. Final configuration and installation suitability should be confirmed for the project.

The catalog names compact kitchens, apartments, and daily RO drinking. Installation compatibility still requires project review.

The page shows 75G, 400G, 500G, and 600G options, with D10 identified as 500G. Confirm the selected version in the order.

A30 lists 600G and 800G capacity options. The final installed option should follow the approved order rather than an assumed default.

R40 is listed as a 100G compact undersink RO system. Final output expectations depend on the confirmed project conditions.

D30 lists 400G, 500G, 600G, and 800G options. The page identity is 600G, while the installed option must be confirmed.

Dry-run protection, low-water alarm, quick-release cleaning, and quiet-operation design are listed. Their safety or noise performance is not quantified.

The page lists one PCRC composite cartridge with a 0.0001 μm label. It does not state cartridge life or independently verified filtration performance.

TDS display, filter-life display, cup sensing, volume presets, and child lock are listed. The page does not provide accuracy, lifetime, or reliability metrics for those features.

The page lists ECF, RO, and post carbon across three cartridges and four stages. No certification is implied by that sequence.

Share the destination, expected timing, quantity, receiving or delivery contact and any access or handover information already known.

Start with the points your café uses, available water or source information, normal and busy-period use, space, expected quantity, maintenance ownership and timing. These inputs help your team build a brief that gives the next review a clear purpose.

D30 lists ECF, RO, and carbon in a tankless integrated-waterway format. It does not document internal construction beyond that wording.

The listed route is carbon rod, RO, and composite antibacterial carbon. The term antibacterial carbon does not state a sterilization rate or health result.

The catalog lists PP/carbon composite, RO, and post carbon across three cartridges and four stages. It does not state a cartridge lifetime.

The catalog lists PP/C1, RO, GAC, and FS across four cartridges and five stages. It does not provide a test report or certification.

Use it for non-clinical public, staff, visitor, dining and drinking areas. Describe the locations and operating responsibilities that need to be considered together.

D40 lists tankless integrated construction and quick-connect cartridges. Confirm cartridge timing and service access separately.

The page names PP cotton, granular activated carbon, antibacterial media, scale-inhibition material, and final filter cotton. No antibacterial rate is given.

D20 is listed as a 600G tankless dual-water RO. Confirm the final outlet arrangement and project connection needs.

Integrated waterway, leakage protection, and filter-life display are listed. Confirm replacement timing and market requirements separately.

Smart display and quick-connect construction are listed. Their accuracy, maintenance interval, and operating behavior are not defined.

Smart display, filter reminder, and quick-connect construction are listed. Accuracy, reminder timing, and service life are not specified.

The page identifies home kitchens, residential projects, and distributor use. OEM details and final project configuration should be confirmed before commitment.

The catalog points to narrow cabinets, apartments, and easy-service use. Confirm actual plumbing and clearance before selection.

Instant Hot gives the office project its own category path. Keeping that path clear carries the relevant workplace, space and project inputs into the next discussion.

A40 lists dual outlets on its 1000G undersink RO format. Confirm the required outlet layout and plumbing route for the installation.

It addresses a distinct point-based task. Its location, available space, power details and expected use should be described independently.

A50 is shown at 470 × 162 × 380 mm. Confirm cabinet clearance, plumbing, and service access on the actual project.